Stern platform
- golfhotel (Hisse-et-Oh, 7 July 2019) found after some searching that Tonics sold in Germany seem to have come with this stern platform, as well as a twin-plate mast foot. greycat could not find a ready-made one in France and decided to build his own. Several people (golfhotel, 31 August 2020; Mousse Kawan, 3 April 2021; Guiadams, 2 April 2025) were still asking for a plan or dimensions. xabia judged by eye that the tube was about 4 cm in diameter.
- In boote-forum.de, DeepPearl (7 July 2015) wanted a platform for his Tonic 23 and asked whether the ones in photos were factory options. Standard platforms from the internet were no use because he needed room for the rudder blade, so he considered a stainless and teak design of his own. AFUNK (20 August 2015), who owns a Dufour 24, adapted a motorboat platform made of 25 mm tube: he welded four mounts from 22 mm tube and cut the middle section. For a ladder he later used a slim telescopic one (1 September 2015). Canderes (31 August 2015) warned that a ladder kept in a locker is not a safe solution, because a person who has fallen in needs one they can lower from the water.
- WTS (8 and 9 March 2022) fitted a small platform. Wooden spacers pass the loads from it to the engine well. JLPIER asked how he had stiffened the transom, since it is very flexible as built.
- Kerare (Hisse-et-Oh, 29 December 2022) fitted a bathing ladder to the transom of a Tonic and found the transom not very stiff compared with an Edel, so he had to reinforce it.
Roll bar and solar panels
In March 2015 a Tonic owner asked about a rear roll bar (“portique”).
- fritz the cat (22 and 23 March 2015) advised a PVC-tube mock-up first. Take care of windage and weight aloft: a 100 W panel is almost 1 m² and would act like a mizzen sail. Keep the bar low and light. He mounted his on the stern pulpit, with 160 W of orientable panels.
- corentin (22 March 2015): after the PVC model, buy the tubes (about 6 euros a kilo), find a bender and a welder.
- guy07800 (22 and 23 March 2015) fitted a ready-made one, light but strong and adjustable in width. They start at about 300 euros ready to use; search “roll bar” or look at Accastiboat.
- fritz the cat also warned that a Kelt 8 m that crossed the Atlantic from the Canaries with a roll bar and solar panels was knocked down several times with the cockpit full of water, because of the extra windage.
- cwb (25 March 2015), with a fin-keel Tonic, asked about tube diameter (he thought 25 mm might do), height, tube layout and material. The thread shows no answers to those.
Sources
- Hisse-et-Oh, “Tonic 23 cherche dimensions ou plan plate-forme arrière dériveur” (in French): greycat, golfhotel, Mousse Kawan, Guiadams, xabia (7 July 2019 to 2 April 2025).
- Hisse-et-Oh, “Portique AR pour Tonic 23“: fritz the cat, guy07800, corentin, cwb (22 to 25 March 2015).
- Hisse-et-Oh, “Mise à jour d’un Tonic 23.“: WTS, JLPIER (8 and 9 March 2022).
- Hisse-et-Oh, “Que pensez-vous du voilier Tonic 23“: Kerare (29 December 2022).
- boote-forum.de, “Jeanneau Tonic 23 Badeplattform Leiter” (in German): DeepPearl, AFUNK, Canderes (7 July to 1 September 2015).