Knowledge

Rigging & sails

A home-made hard dodger and cockpit enclosure

A Danish owner replaced the old sprayhood of his Tonic 23+2 with a plywood-framed hard dodger for about 300 euros, and later closed the cockpit for about 400 euros. One owner's build, with materials and prices.

Estimated cost
About 300 euros for the dodger and about 400 euros for the cockpit enclosure, as stated by the owner

Last updated October 23, 2026

Source: a “Hints and Tips” page of the Jeanneau Owners Network by Svend Aage Johannesen, owner of the Tonic 23+2 “Sifka” (1986, Denmark). The page has photographs, which show the build.

The dodger

The old sprayhood was out of date, so he built a hard dodger instead.

  • The frames are plywood, attached to the old sprayhood frames with hot glue.
  • The windows are held to the plywood frames with Velcro tape.
  • The roof is a leftover piece of plastic roofing from his home.
  • Price: about 300 euros.

Closing the cockpit

The following summer he decided to enclose the cockpit as well. Price: about 400 euros. The page shows the result in photographs and gives no further details.

Sources

  • Jeanneau Owners Network (jeanneau-owners.com), “Hard top Dodger/Sprayhood for a Tonic” (Hints and Tips), by Svend Aage Johannesen, Sifka, Denmark. Read in a Wayback Machine copy of 2024; the exact page address is not recorded in the saved file.

Materials

  • Plywood for the frames
  • Hot glue
  • Velcro tape for the windows
  • Leftover plastic roof panel